Instructions Order Now Hot VW
Testimonials Press Coverage
How to build a hose assembly with Koul tools
For information, contact Koul Tools LLC at sales@koultools.com
Back to KOULtools Homepage.

KOUL Tools International Sales

CANADA
Wholesale Distribution
Dix Performance North

11670 - 170 St.
Edmonton, AB T6S 1J7
Canada
800-661-9327
Local 780-466-9266

www.dixperformancenorth.com

CANADA
Retail Outlet
JBs Power Centre
- West (40)
11680 - 170 Street
Edmonton, AB T5S 1J7
Canada
780-468-1178
Jb40@jbspowercenter.com
CANADA
Retail Outlet
JBs Power Centre - South (10)

6420 104 Street
Edmonton, AB T6H 2L2
Canada
780-468-1178
Jb10@jbspowercenter.com
CANADA
Retail Outlet
JBs Power Centre - North (30)

13528 Fort Road
Edmonton, AB T5A 1CS
Canada
780-468-1178
Jb30@jbspowercenter.com
CANADA
Retail Outlet
JBs Power Centre - Calgary

1695 32 Avenue NE
Calgary, AB T2Y 2V3
Canada
780-468-1178
Jb60@jbspowercenter.com
 

EUROPE
ISA-RACING GmbH
D-56736 Kottenheim/Germany
Tel. 0049-2651-9625 0
Fax 0049-2651-9625 10
einkauf@isa-racing.de

AUSTRALIA
Automotive Performance Distributors
35 Chapel Street
Norwood.
South Australia 5067
Phone 61 8 8363 5566
Fax 61 8 8363 5633
www.apd.on.net


click for a larger view

SMALL KIT

p/n 468

Please check with a distributor
listed above for
International Orders

The small kit contains the capsules to install -4, -6, -8 hose into their respective sockets. To accommodate all the different manufacturer’s fittings, spacers and sleeves are required to tighten up the some of the sockets within the capsule. For the tool to perform at its best, the socket needs to be a snug fit in the funnel. The two spacers are used in some -6‘s and 8‘s. If the socket seems loose in the tool, use a spacer to tighten it up. In the small kit, only the Russell -4 needs a sleeve. Not for use with Teflon-style hose.



click for a larger view

LARGE KIT

p/n 1016

Please check with a distributor
listed above for
International Orders

The large kit contains the capsules to install -10, -12, -16 hose into their respective sockets. To accommodate all the different manufacturer’s fittings, spacers and sleeves are required to tighten up some of the sockets within the capsule. For the tool to perform at its best, the socket needs to be a snug fit into the funnel. In the 1016  kit, all the -16’s except Russell’s require the sleeve and a rear spacer. See the instructions in the case for the proper spacer number. Most of the -10’s and 12’s* will use a spacer. Not for use with Teflon-style hose.

* -12 is a stainless washer.


Hot Rod Kit
click for a larger view

HOT ROD KIT

p/n 681

Please check with a distributor
listed above for
International Orders

The Hot Rod kit contains the capsules to install -6, -8, -10 hose into their respective sockets. To accommodate all the different manufacturer’s fittings, spacers and sleeves are required to tighten up some of the sockets within the capsule. For the tool to perform at its best, the socket needs to be a snug fit into the funnel. Spacers are used in some -6‘s, -8‘s, and most -10's. If the socket seems loose in the tool, use a spacer to tighten it up. See the instructions in the case for the proper spacer number. Not for use with Teflon-style hose.


Hot Rod Kit

THE PRO COMBO

p/n 416


Pros need both kits to handle
all the hose sizes in a race car.

Please check with a distributor
listed above for
International Orders

The Pro Combo is a special offer of BOTH the #468 and #1016 kits listed above. Pros need both kits to handle all the hose sizes in a race car. Ordering this combination will save $15.00. Not for use with Teflon-style hose.


KOUL Singles

 

-6 KOUL SINGLE
-8 KOUL SINGLE
-10 KOUL SINGLE


     Please check with a distributor
     listed above for
     International Orders


  
 

For information, contact Koul Tools LLC at sales@koultools.com
Back to KOULtools Homepage.

© Copyright 2004-2007 KOUL TOOLS LLC. All Rights Reserved, Site Design by Frontline Graphics